 Molds can be made in a couple of days
Molds are durable for 20 or more copies
Economical Mold
Pre-launch product testing
Small series of housings and covers
Wide range of post-processing techniques can be choosed 

Technical Specifications
Standard lead time
Up to 20 copies within 10 working days
Standard accuracy
±0.2% (with a lower limit on ± 0.2 mm on dimensions smaller than 100 mm)
Minimum wall thickness
To ensure that the mold is filled properly, a wall thickness of at least 0.75 mm is necessary. For best results, we recommend a wall thickness of at least 1.5 mm
Maximum part dimensions
The size of the mold is limited by the dimensions of the vacuum chamber (1900 x 900 x 750 mm) and by the volume of the product (maximum volume: 10 liters)
Typical quantities: 10-50pcs
Surface structure: Painting/Electroplating
High-quality surface finish comparable to injection molding

Economical Cost: Compared with other low volumen production technique, the vacuum casting is one of the most economical processing technique to make your parts.

Advanced Imported Material: At our silicon mold center, we use the advanced material to make your parts, with datasheet and material report provided .

Diverse Post-treatment: Generally the parts that come out directly from the silicon mold may need some post-treatment like painting or silk screen. As your one stop partner you can find a wide range of finishes for your projects.

Premium Quality: Our professional and experienced engineers will control every processes during the product-making, with nearly ZERO rejection rate for the quality of this processes.

Expectational speed: Every RFQ will be answered within 12 hours and normally the vacuum casting takes 7-14 days to delivery the parts.  

High-Complex Vacuum Casting techiques: At Best Protoypes, we have lots of sucessful cases regarding of this process, such as: Overmoulding (Premade parts are placed into the mold to mold over them together. Such as:Instrument board) and 2 colors silicon mold (A silicon mold that fabricates two different colors for parts.Such as: Automotive lamp. )